.
About Us
.
Products
...
Solarium Kits
...
Sunrooms
...
Sealariums
...
Skylights
...
Awnings
...
Gazebos
...
Spa Enclosures
...
Garden Sheds
...
Pine Centers
...
Cottages
...
Spas / Hot Tubs
...
Swimspas
...
Saunas
.
Photo
Galleries
.
Links
.
Site Map
.
Contact Us
.
Printable Page
.......................
|
|
|
.
Main Page
|
Acrylic Sunrooms
|
Structural Component System
|
Specifications
|
Engineering & Load Test
.
Polycarbonate Glaze
|
Kits
|
Glaze & Rafter Samples
|
Fans
|
Sunroom Photos
|
.All
models carry a full Two Year
Warranty |
|
Technical
Description
- Manufactured
in weather resistant high quality
polymeric materials, integrated
component design for simple
installation and after care
without the need for specialist
tools.
- Fully
protected connector socket for
easy installation and
disconnection for simple cleaning
and maintenance.
- Motor
continuously rated with long life
impregnated bearings and large
oil reservoirs. It has a cast
alloy body and is capacitor start
and run. Quiet running and
totally enclosed, it is designed
for use at any angle, in ambient
temperature from -40ºF to
+122ºF.
- Fitted
with self setting thermal cut out
- protected to IP44.
- Slim
interior and exterior profile.
External projection is 1¼"
on window models.
- Internal
and external louvres meet the
most stringent international
safety tests.
- Supply
voltage 120V/1/60Hz. Details of
other voltages on request.
| Five models each in four sizes. |
|
| WINDOW MODEL Unit
sizes, 6, 7, 9 and 12. Perfect for most single and double-glazing,
including wire cast, reeded, leaded lights and fixing
plates up to 1" thick. For greater thicknesses up
to 14½", Extended Fixing Rod Sets are available.
Also for use with ducting. Easily fitted through a round
hole in the window glass or fixing plate. |
Window Model |
| ROOF MODEL Unit sizes, 6, 7, 9
and 12. A specially designed fan, with low profile cowl,
for fitting in roofs, skylights, some metal-clad roofs
and vertical surfaces in exposed areas. All 4 sizes can
be easily fitted to flat and pitched roofs, using Vent-Axia
Roof Plate Assemblies, or to corrugated profiles using
Vent-Axia Soaker Flange Sheets. Fits materials up to 1"
thick. For greater thicknesses up to 14½" Extended
Fixing Rod Sets are available. |
Roof Model |
| WALL MODEL Unit sizes, 6, 7, 9
and 12. A close fitting model for most cavity and solid
walls using the telescopic wall liner supplied with each
unit. Minimal external and internal projection. Allowance
has been made in the wall liner for conduit entry. Fits
thicknesses up to 12". |
Wall Model |
|
| PANEL MODEL Unit sizes, 6, 7, 9
and 12. Ideal for fitting into internal partitions, ceilings,
ducts and flues etc. This model can be connected directly to
circular duct work. |
Panel Model |
| DARKROOM MODEL Unit sizes, 6, 7, 9
and 12. For ventilation of darkrooms without letting in light.
Suitable for window, roof and wall fixing. Hole sizes as for
roof models. |
Darkroom Model |
|
